ABSTRACT
We report the case of a 76-year-old man who developed type IA endoleak through the fenestration after 1-debranch TEVAR using a Najuta endograft. The patient was admitted with expansion of the aneurysm after TEVAR, for additional therapy. Type IA endoleak through a fenestration has remained a significant clinical concern and its treatment is challenging. We performed Zone 0 TEVAR using the “Squid-Capture” technique assisted in situ stent-graft fenestration. Cerebral vessels were perfused by a percutaneous cardiopulmonary support system during in situ stent-graft fenestration, and the cerebral branch was clamped at the proximal site. It is difficult to operate the catheter inside the endoskeleton structure of a Najuta endograft, but several innovations were effective. Test dilation of the balloon catheter was performed to ensure that the wire did not interfere with the endoskeleton. Avoiding interference with the endoskeleton is important. The Squid-Capture technique allows safe and secure puncture of the graft. The operation was completed successfully. After this procedure, the endoleak disappeared. It is considered to be a useful method for treatment of endoleak through the fenestration.
ABSTRACT
【Objective】 To explore the diagnosis and choice of surgical treatment of paraurethral cyst in adults. 【Methods】 The clinical data of 56 patients with paraurethral cyst treated at our hospital during Dec.2011 and Jul.2022 were retrospectively analyzed. 【Results】 Of the 56 patients, most of the urethral masses were found during physical examination or bathing, and the time between finding of masses and admission was 2 days to 10 years. Two cases were diagnosed as vaginal wall mass, and one as ureal mass, which were confirmed by postoperative pathology as leiomyoma. Fifty-three cases were diagnosed as paraurethral cysts, 15 of whom underwent fenestration and 38 complete resection of the cyst wall. In the 38 cases who underwent complete resection of cyst wall, 6 had urethral damage due to large and deep cysts closely connected with the urethra, and catheter was indwelled for 10 to 14 days after surgery. All cases were cured without complications. There was no recurrence during the 2 months to 10 years of follow-up. 【Conclusion】 Paraurethral cysts are not difficult to diagnose. Large cysts are likely to damage the urethra due to repeated infection and close connection with urethra. We suggest that the large and deep paraurethral cysts should be removed with fenestration.
ABSTRACT
@#Objective To investigate the effect of in vitro fenestration on reconstruction of left subclavian artery in endovascular treatment of aortic dissection. Methods A total of 89 patients with aortic dissection involving left subclavian artery were treated by endovascular treatment in the Second Affiliated Hospital of Fujian Medical University from February 2017 to January 2020. There were 44 patients in the test group, including 36 males and 8 females, with an average age of 58.02±13.58 years. There were 45 patients in the control group, including 35 males and 10 females, with an average age of 54.10±12.32 years. The left subclavian artery was reconstructed by in vitro fenestration in the test group and by chimney technique in the control group. The clinical data were compared between the two groups. Results The operation time of the test group was longer than that of the control group (126.16±7.53 min vs. 96.49±6.52 min, P<0.01). The median follow-up time was 31 (13-48) months. The incidence of endoleak in the test group (4.7%) was lower than that in the control group (18.6%, P=0.04) during the follow-up. There was no statistical difference in the incidence of stroke, myocardial infarction, false lumen thrombosis, retrograde aortic dissection or left subclavian artery occlusion between the two groups (P>0.05). Conclusion In vitro fenestration for reconstructing left subclavian artery in thoracic endovascular aortic repair of aortic dissection is safe and feasible, which is worthy of further clinical promotion.
ABSTRACT
@#In many cases, tooth movement over a considerable distance is needed to meet the major goal of orthodontic treatment, which has always been to correct malocclusion and improve the facial profile in patients with skeletal malocclusion. However, tooth movement over a considerable distance also carries risks of dehiscence, fenestration, root exposure, and so forth. The reason lies in neglecting many limits for tooth movement, especially anatomical characteristics. This review focuses on structural limits for orthodontic molar movement, such as the alveolar cortex, the maxillary sinus floor, and the mandibular canal. In addition, we set the strategy in clinical orthodontics. For the alveolar cortex and the mandibular canal, orthodontists are recommended to move the root away from the cortical bone initially and formulate personalized molar movement plans according to clinical examination and cone-beam computed tomography (CBCT) and other imaging examinations. First, the molar root was controlled by torque away from the bone plate, and then, the molar movement amount and direction were controlled according to the personalized movement path. In regard to the maxillary sinus floor, light and continuous forces and scientific biomechanics are suitable for bodily tooth movement. In summary, better therapeutic efficacy and long-term stabilization could be achieved by circumventing the limits and risks caused by anatomical limitations and characteristics.
ABSTRACT
Objective To explore hemodynamics of the aortic arch and supraarch vessels after thoracic endovascular aortic repair with fenestration and parallel grafts techniques, and compare the differences of these techniques. Methods Four patients with aortic arch lesions whose supraarch vessels were reconstructed by different surgical techniques (fenestration, chimney and periscope) were studied, and three-dimensional (3D) geometric models were established based on postoperative image data. The physiological flow obtained from two dimensional (2D) phase contrast magnetic resonance imaging were imposed on the ascending aorta inlet and the supraarch vessels outlets. The pressure waveform of 3-element Windkessel model was imposed on the descending aorta outlet. Through computational fluid dynamics ( CFD ) simulations, the hemodynamic parameters were obtained, including the pressure of supraarch vessels, the velocity vector of the stent inlet, and the relative residence time. Results The pressure change of the periscope stent was the largest, followed by the fenestration stent, and the pressure change of the chimney stent was the smallest. The velocity of the fenestration and periscope stent inlet was uneven, which might form vortex. The velocity of the chimney stent inlet was even. The high relative residence time concentrated in distal end of the fenestration stent outer wall, the ‘gutter’ part, and the place where the chimney and periscope stent adhered to the vessel wall. Conclusions The pressure difference between the inner and outer walls of the fenestration and periscope stent was high, so it was recommended to use the balloon-expandable stent. The pressure difference between the inner and outer walls of the chimney stent was low, so it was recommended to use the self-expanding stent. The predicted location of thrombosis was consistent with the clinical follow-up data, so it may be used for surgical planning and risk assessment of interventional treatment of aortic arch lesions.
ABSTRACT
OBJECTIVE@#To evaluate the decompensation effectiveness and alveolar bone remodeling of mandibular anterior teeth after preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusion using lateral cephalogram and cone-beam computed tomography (CBCT).@*METHODS@#Thirty high-angle patients with skeletal class Ⅱ malocclusion who had received preoperative orthodontic treatment and orthognathic surgery in Peking University School and Hospital of Stomatology between Ja-nuary 2017 and August 2022 and had taken lateral cephalogram and CBCT before and after preoperative orthodontic treatment were selected. Items were measured with lateral cephalogram including: The lower central incisor (L1)-Frankfort plane angle (L1-FH), the L1-mandibular plane angle (L1-MP), the L1-nasion-supramental angle (L1-NB) and the vertical distance from the incisal edge of lower central incisor to NB line (L1-NB distance), etc. The incidence of dehiscence/fenestration and the length of dehiscence at labial side (d-La) and lingual side (d-Li) were measured using CBCT. Pearson correlation analysis was used to evaluate the correlation between the changes of d-Li of L1 and age, duration of preoperative orthodontic treatment and the cephalometric measurements before preoperative orthodontic treatment to screen out risk factors affecting the periodontal risk of preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusions.@*RESULTS@#After preoperative orthodontic treatment, L1-FH, L1-MP, L1-NB and L1-NB distances changed by 11.56°±5.62°, -11.13°±5.53°, -11.57°±5.43° and (-4.99±1.89) mm, respectively, and the differences were all statistically significant (P < 0.05). Among the 180 measured mandibular anterior teeth, 45 cases with labial dehiscence/fenestration before preoperative orthodontic treatment (T0) had no longer labial dehiscence/fenestration after preope-rative orthodontic treatment (T1); 142 cases without lingual dehiscence/fenestration at T0 had lingual dehiscence/fenestration at T1. After preoperative orthodontic treatment, the d-La of lower lateral incisors (L2), lower canines (L3) and lower anterior teeth (L1+L2+L3) decreased by (0.95±2.22) mm, (1.20±3.23) mm and (0.68±2.50) mm, respectively, and the differences were statistically significant (P < 0.05); the d-Li of L1, L2, L3 and L1+L2+L3 increased by (4.43±1.94) mm, (4.53±2.35) mm, (3.19±2.80) mm and (4.05±2.46) mm, respectively, and the differences were statistically significant (P < 0.05). The increase of d-Li of L1 was positively correlated with L1-FH (r=0.373, P=0.042).@*CONCLUSION@#This study showed that high-angle patients with skeletal class Ⅱ ma-locclusion could achieve ideal decompensation effect of mandibular anterior teeth after preoperative orthodontic treatment with bilateral mandibular first premolars extracted, but the lingual periodontal risk of mandibular anterior teeth was increased. This risk could be correlated to L1-FH before preoperative orthodontic treatment, which should be paid more attention in the design of orthodontic-orthognathic surgical treatment.
Subject(s)
Humans , Malocclusion, Angle Class III , Malocclusion, Angle Class II/surgery , Facial Bones , Incisor , Orthognathic Surgical Procedures , Cone-Beam Computed Tomography , MandibleABSTRACT
Objective:To investigate the feasibility and clinical effect of the surgical approach and method of transnasal fenestration under nasal endoscope for the treatment of maxillary odontogenic cyst. Methods:The clinical data of 23 cases with maxillary odontogenic cysts treated by nasal endoscopy through nasal fenestration were retrospectively analyzed. All cases underwent nasal endoscopy and CT examination before the operation. The mucosal membrane of the parietal wall of the cyst was excised through fenestration of the nasal base. The cyst fluid was removed by decompression, and the bony opening of the nasal base was trimmed and enlarged to the edge of the cyst. The intraoperative and postoperative effects were observed. Results:All cases were well exposed under the direct vision of nasal endoscope. The top wall of the cyst was removed to maximize the communication between the cyst cavity and the nasal floor. There were no complications such as nasolacrimal duct injury, turbinate atrophy, necrosis, and facial numbness. All patients were followed up for 6-12 months, and the clinical symptoms gradually disappeared after surgery. The inferior turbinate was in good shape, the cyst cavity was smooth, the cyst wall was determined, and no cyst recurrence was observed. Conclusion:The treatment of odontogenic cyst of maxilla under nasal endoscope through nasal fenestration is convenient. It has less trauma, fewer complications and a satisfactory curative effect, which is worthy of clinical promotion.
Subject(s)
Humans , Maxilla , Retrospective Studies , Odontogenic Cysts/surgery , Endoscopy , Turbinates/surgery , EndoscopesABSTRACT
Background: Prolapsed lumbar intervertebral disc is one of the most common problems encountered in medical practice. In orthopaedic practice patients having lesions of lumbosacral region causing low back pain with sciatica are not uncommon since the begdatainning of recorded history. To evaluate the fenestration and discectomy for prolapsed lumbar intervertebral disc by minimally invasive procedure.Material & Methods:This prospective observational study was conducted at National Institute of Traumatology and Orthopaedic Rehabilitation (NITOR), Dhaka, Bangladesh during July 2015 to June 2017. A total of 31 patients with prolapsed lumbar intervertebral disc were included for the study. A 3cm incision was made in midline on back centering the desired space of the spine. The analysis was done according to the standard statistical analysis system. Prior to commencement of this study, the research protocol was approved by the Institutional Review Board of ethics of National Institute of Traumatology and Orthopaedic Rehabilitation (NITOR).Results:Mean age was (35.98 ± 8.50) years with the range from 17 to 50 years. Out of 31 patients, 26 (83.87%) patients were male and 05(16.12%) were female. Out of 31 patients 01(03.22 %) had prolapse at the level of L3-L4, 23(74.19%) had at the level of L4-L5 and 07(22.58%) had at the level of L5-S1. In this series the most common causes of muscle weakness in EHL. Out of 31 patients, 22 (70.96 %) patients had weakness in EHL. 08 (25.80%) cases had weakness in FHL and both muscle weakness in 01 (3.22%). Out of 31 patients, 30 (96.78%) patients had preoperative sensory deficit and 03(09.67%) patients had postoperative sensory deficit, which is statistically significant. In preoperative period, moderate pain in 27(83.87%) patients, severe pain in 04(12.90%) patients. In postoperative period had no pain in 22(70.96%) patients, mild pain was noted in 08(25.08%) patients, moderate pain in 01(03.22%) patient. 20(64.51%) patients had para spinal muscle spasm in the preoperative period. Postoperative mean SLR was 81.94 ± 4.774 degree and range was 70?-90?, which was significantly improved. 29 (93.54%) patients had normal spine movement and 02 (06.45%) patients had restricted movement after 3 months of follow up. The minimum period of duration for follow up was 3 months and maximum duration of follow up was 12 months..Conclusions:By considering all aspects fenestration and discectomy is a better technique in the context of our country with the advantage of less tissue injury, good spinal function, smooth patient recovery, improve working status with early rehabilitation and maintain clinical efficacy.
ABSTRACT
@#Objective To evaluate the clinical value of in vitro fenestration and branch stent repair in the treatment of thoracoabdominal aortic aneurysm in visceral artery area assisted by 3D printing. Methods The clinical data of 7 patients with thoracoabdominal aortic aneurysm involving visceral artery at the Department of Vascular Surgery, Shandong Provincial Hospital Affiliated to Shandong First Medical University from March 2016 to May 2019 were analyzed retrospectively. There were 5 males and 2 females with an average age of 70.2±3.9 years. Among them 4 patients had near-renal abdominal aortic aneurysm, 3 had thoracic aortic aneurysm, 4 had asymptomatic aneurysm, 2 had acute symptomatic aneurysm and 1 had threatened rupture of aneurysm. According to the preoperative CT measurement and 3D printing model, fenestration technique was used with Cook Zenith thoracic aortic stents, and branch stents were sewed on the main stents in vitro, and then the stents were modified by beam diameter technique for intracavitary treatment. Results All the 7 patients completed the operation successfully, and a total of 18 branch arteries were reconstructed. The success rate of surgical instrument release was 100.0%. The average operation time was 267.0±38.5 min, the average intraoperative blood loss was 361.0±87.4 mL and the average hospital stay was 16.0±4.2 d. Immediate intraoperative angiography showed that the aneurysms were isolated, and the visceral arteries were unobstructed. Till May 2019, there was no death, stent displacement, stent occlusion, ruptured aneurysm or loss of visceral artery branches. Conclusion 3D printing technology can completely copy the shape of human artery, intuitively present the anatomical structure and position of each branch of the artery, so that the fenestration technique is more accurate and the treatment scheme is more optimized.
ABSTRACT
@#Objective To report our clinical experience and outcomes of thoracic endovascular aortic repair (TEVAR) for acute Stanford type A dissection using ascending aorta replacement combined with implantation of a fenestrated stent-graft of the entire aortic arch through a minimally invasive technique. Methods From 2016 to 2020 in our hospital, 24 patients (17 males and 7 females, aged 45-72 years) with complicated Stanford type A aortic dissection, underwent replacement of the proximal ascending aorta with TEVAR. None of the patients with dissection involved the three branches of the superior arch, and all patients were replaced with artificial blood vessels of the ascending aorta under non-hypothermic cardiopulmonary bypass, preserving the arch and the three branches above the arch, and individualized stent graft fenestration. Results Surgical technical success rate was 100.0%. There was no intraoperative complication or evidence of endo-leak in 1 month postoperatively. Hospital stay was 10±5 d. During postoperative follow-up, the stent was unobstructed without displacement, the preserved branch of the aortic arch was unobstructed, and the true lumen of the descending aorta was enlarged. Conclusion This hybrid technique by using TEVAR with fenestrated treatment is a minimally invasive and effective method to treat high-risk patients with acute Stanford type A aortic dissection.
ABSTRACT
Objective:To investigate the effectiveness and feasibility of 3D printing-assisted extracorporeal fenestration techniques in thoracic aortic endoluminal repair.Methods:Retrospectively analyzed the clinical data of patients who underwent endovenous repair of the thoracic aorta with the application of 3D printing technology-assisted extracorporeal windowing in the Department of Cardiovascular Surgery, Wuhan University Hospital from January 2019 to May 2021, and analyzed the surgical results as well as the occurrence of perioperative complications.Results:A total of 10 patients with a mean age of(53.3±15.7) years were included, including 4 cases of complex B aortic coarctation, 5 cases of thoracic aortic aneurysm and 1 case of abdominal aortic aneurysm. All patients in this group underwent endoluminal repair of the thoracic aorta with 3D printing assisted extracorporeal fenestration, including 1 case of PCI performed at the same time. There were no postoperative complications and no perioperative deaths.Conclusion:3D printing technology assisted extracorporeal fenestration and endoluminal aortic repair can accurately position aortic stents for fenestration, optimise endoluminal treatment options and improve patient prognosis.
ABSTRACT
Objective:To summarize the clinical experience and effect of applying 3D printing assisted with the technology of extracorporeal pre-fenestration in the treatment of thoracic/abdominal aortic aneurysm.Methods:From August 2019 to November 2020, 15 patients with thoracic/abdominal aneurysm involving visceral arteries were admitted to our center, including 11 males and 4 females, with mean age of 57-82(68.26 ±4.73) years old. According to diameters of visceral artery, thoracic aorta, abdominal aorta, and bilateral iliac arteries measured by CTA, we selected suitable stents and made a 3D printing model by professional software to guide the position of intraoperative external fenestration and the fenestration diameter to implement full cavity repair.Results:All operations were completed and one case was converted to laparotomy. The average time of operations was(200.67±41.00)min and hospital stay was(13.47±4.16)days without any death, organ failure, endoleak, paraplegia, graft infection and other complications.Conclusion:The application of 3D printing assisted with the technology of extracorporeal pre-fenestration in the treatment of thoracic/abdominal aortic aneurysm is feasible and effective, and the short-term results are satisfactory.
ABSTRACT
Objective:To investigate clinical efficacy of curved fenestration and drainage procedure for the treatment of nail root abscess.Methods:From June 2018 to October 2020, 72 patients with nail root abscess were included in Department of Dermatology, Henan Armed Police Corps Hospital. According to the size, location and severity of the abscess, minimally invasive curved fenestration and drainage procedure was performed under nerve block anesthesia to reduce the pressure and drain the pus. Dressing change was strengthened after surgery, and wound healing was monitored.Results:Among the 72 patients, there were 37 males and 35 females, and their ages varied from 39 to 80 years (average: 63 years) . They all received curved fenestration and drainage procedure. Fifteen days after surgery, 66 cases were cured, 6 obtained marked improvement, and the response rate was 100%. Lesions did not completely subside in 1 patient due to poor blood glucose control and small exposure area at the fenestration site, while the condition of other patients was effectively controlled. Telephone follow-up was conducted 3 months after surgery, and no obvious nail defects or deformed appearance was observed in any of the cases.Conclusion:Curved fenestration and drainage procedure is a simple approach for nail root abscess, with satisfactory efficacy.
ABSTRACT
ABSTRACT Introduction: to determine the frequency of fenestration and dehiscence bone defects present in maxillary teeth with apical periodontitis, mainly in teeth with endodontic treatment, as they are frequently cause of nonspecific symptoms after treatment. Methods: 1201 Maxillary Cone Beam Computed Tomography (CBCT) exams were analyzed and 803 teeth with apical periodontitis were selected. Results: of the teeth with apical periodontitis, 142 had a fenestration defect (18%) of which 105 teeth (74%) were endodontically treated. The highest frequency was observed in premolars, with no statistical differences between groups. Dehiscence defect was found in 139 teeth (17%) out of which 90 (65%) were endodontically treated. The highest frequency was observed in molars, with statistical differences in relation to other tooth types (p< 0.001). Conclusion: an important number of teeth with apical periodontitis present dehiscence or fenestration bone defects, especially in teeth with root canal treatment.
Resumen Introducción: determinar la frecuencia de fenestraciones y dehiscencias presentes en dientes maxilares con periodontitis apical, principalmente en dientes con tratamiento de endodoncia, pues frecuentemente son causa de síntomas inespecíficos después del tratamiento. Métodos: se examinaron y analizaron 1201 tomografías computarizadas de haz cónico (TCHC), y se seleccionaron 803 dientes con periodontitis apical. Resultados: de los dientes con periodontitis apical, 142 presentaban fenestración (18%), de los cuales, 105 dientes (74%) estaban tratados endodónticamente. La mayor frecuencia fue observada en premolares, sin diferencias estadísticas entre los grupos. La dehiscencia fue encontrada en 139 dientes (17%), de los cuales 90 (65%) estaban tratados endodónticamente. La mayor frecuencia fue encontrada en molares con diferencia estadísticas en relación con los otros tipos de dientes (p<0,001). Conclusión: un importante número de dientes con periodontitis apical presentan fenestraciones y dehiscencias, especialmente en dientes con tratamiento de canales radiculares.
Subject(s)
Orthognathic Surgery , Tomography, X-Ray Computed , EndodonticsABSTRACT
Blunt traumatic thoracic aortic injury (BTAI) is an extremely serious medical condition with a high rate of associated mortality. Recent advances in techniques such as thoracic endovascular repair offer new opportunities to manage the critical BTAI patients in an efficacious yet less invasive manner. A 65 year-old-male suffered from multiple injuries after a fall, including BTAI in the aortic arch, which resulted in dissection of the descending thoracic-abdominal aorta and iliac artery, development of an intimal flap in the left common carotid artery, and dissection of the left subclavian artery. Based on the imaging information of this patient and our clinical experience, the combined treatment of fenestrated thoracic endovascular repair and a chimney technique was immediately planned to fully repair these dissections and moreover prevent further dissection of the branching vessels, additionally to ensure sufficient blood flow in the left subclavian artery and left common carotid artery. The intervention yielded satisfactory early outcomes. Follow-up assessment at six months reported no symptoms or complications associated with the stent-graft. Computed tomography angiography further confirmed adequate stent-graft coverage of the aortic injury.
ABSTRACT
Objective:To investigate the effect of different ways of reconstruction of left subclavian artery (LSA) in the treatment of complex aortic arch lesions.Methods:The clinical data of 34 patients with complex thoracic aortic disease undergoing intracavitary LSA reconstruction in our center from January 2019 to February 2020 were retrospectively analyzed. The distance of proximal healthy landing zone of all patients, including 29 aortic dissections involving LSA, 3 penetrating aortic ulcer and 2 thoracic aortic aneurysms, was less than 15 mm. Among them, 16 cases were treated with chimney technique, 16 cases were implanted with single branched stent-graft, 2 cases were received with left common carotid artery and LSA in situ fenestration.Results:The operation success rate of all 34 patients was 100%. One case was changed from in situ fenestration to chimney stenting. Followed up for 1-12 months, there were no death, cerebral ischemia, paraplegia and other postoperative complications. CTA review showed that the main and branch stents were in good shape, the patency rate of LSA branch stents was 100% and no endoleak occurred at 1 and 3 months after operation. The muscle strength and arterial blood pressure of bilateral upper limbs of all patients were basically the same.Conclusion:There is no consensus for the treatment of complex aortic arch lesions, so we need to customize the personalized plan and select the appropriate LSA reconstruction method in order to reduce the incidence of complications.
ABSTRACT
Objective@# To explore the feasibility of curettage combined with fenestration for jaw classic ameloblastoma treatment and to provide a basis for improving the treatment of classic ameloblastoma. @*Methods@# Twenty-two patients with jaw classic ameloblastoma admitted to Liuzhou People’s Hospital from 2016 to 2019 were selected. They were treated by curettage combined with fenestration. Monthly follow-up visits were conducted after surgery, and orthopantomography was performed for reexamination to observe the recovery of bone and whether there was recurrence. @*Results @#Tumors were completely scraped off in 22 patients, no pathological fracture occurred, and no wound infection occurred after surgery. After 1 to 3 years of follow-up, 19 patients showed excellent bone recovery in the original tumor area, and no recurrence was observed. Three patients relapsed and underwent a second curettage combined with fenestration, and the bone at the original tumor site recovered well. During the 12-month follow-up, no tumor recurrence was observed. After the second curettage combined with open surgery, the bone at the original tumor site recovered well. Eight patients underwent dental implants to repair dentition defects one year after surgery.@*Conclusion@#Curettage combined with fenestration is a convenient and effective treatment for jaw classic ameloblastoma.
ABSTRACT
@#Objective To analyze the effectiveness of in vitro fenestration versus bypass surgery techniques in the treatment of type B aortic dissection involving the left subclavian artery by thoracic endovascular aortic repair (TEVAR). Methods Among the 53 patients with type B aortic dissection involving the left subclavian artery admitted to our center from January 2017 to October 2020, 23 underwent in vitro fenestration + TEVAR (a fenestration group with 18 males and 5 females aged 53.6±5.3 years), and 30 patients underwent left common carotid artery-left subclavian artery bypass + TEVAR (a bypass group with 24 males and 6 females aged 51.8±3.8 years). The effectiveness and safety between the two groups were compared. Results The surgical success rate was 100.0% in both groups. And there was no death within postoperative 30 days and during the follow-up. There was no endoleak immediately postoperatively and during 1-year follow-up in the two groups. The operation time and hospitalization expenses in the fenestration group was less or shorter than those in the bypass group (P<0.05). The reduction in blood pressure of the left upper limb in the fenestration group was greater than that in the bypass group (P<0.05). There was no symptom of left upper limb ischemia, dizziness or hoarseness in both groups. Conclusion The two methods of reconstruction of the left subclavian artery are safe and effective. In vitro fenestration can reduce surgical trauma and costs, and bypass surgery can provide better forward blood flow for the left subclavian artery.
ABSTRACT
Fenestrated thoracic aortic endovascular repair (TEVAR), as the most advantageous technique for total endovascular repair of aortic arch lesions, has been widely carried out in China, but the technical level is different, the operation process lacks standardization, and the quality control is insufficient. This article discusses the technical details include how to ensure the controllability of TEVAR in physician-modified fenestration, how to choose indications, select fenestration positions, make fenestration, install preset guide wires, unwind guide wires, accurately position fenestration of the hole, delivery and release of the bridging stent combined with author′s experience.
ABSTRACT
ABSTRACT@#Orthodontic treatments have been described as a risk factor for the development of gingival recessions. This descriptive and cross-sectional study was performed to evaluate the alveolar bone morphotype of the upper and lower anterior of 33 orthodontic treatment of candidate patients. The images were obtained from a high-resolution cone beam computerised tomography. Then, the thickness of the alveolar bone plate of teeth was measured in six levels, recording the presence of dehiscences and fenestrations. A total of 2,334 sites were evaluated. The average thickness of the maxillary alveolar bone at the buccal surface was 0.70, 0.62 and 1.43 mm at the cervical, middle and apical levels, respectively, while in the mandibular teeth it was 0.53, 0.50 and 2.96 mm. At the palatal and lingual surfaces, the bone was thicker than the buccal except at the apical level of the mandible. Most of the examined sites were measured less than 1 mm (n = 1,235, 52.9%), associated with high prevalence of bone dehiscences (57.6%) and fenestrations (33.3%), particularly in skeletal Class III patients. The observed bone morphotype involved a high vulnerability to bone resorption, and the subsequent gingival recession occurrence, face to orthodontic movements.